MAGNA-TIP 4″ EXTENSION BROWNELLS MAGNA-TIP 4″ EXTENSION
Leave a Comment
Adds 4″ to any Magna-Tip driver to allow access to those hard-to-reach places. Magnetic socket holds bits securely. Fits all Magna-Tip bits and handles.
SPECS: 4″ (10.2cm) long.
Price: $9.99
STRAP-ON CHEEK PAD 2022 STRAP-ON CHEEK PIECE
Leave a Comment
Comfortable, strap-on cheek pad helps you gain a positive and consistent cheekweld on buttstocks without an integral cheekrest or raised comb. Felt-like, waterproof inner pad with overlaid PVC shell cushions recoil and minimizes perceived vibration, so your face takes less of a beating when firing large caliber rifles or full automatic weapons. Outer covering of heavyweight, 1000 Denier ballistic cloth resists abrasion and perspiration. Three, extra-thick, hook-and-loop straps with loops allow you to cinch it down tight on the stock for absolutely no movement under recoil. Installs and removes in just seconds. Designed originally for the M14/M1A, but fits equally well on sporting rifles a
SPECS: 1000 Denier nylon, black or tan. 1⁄2″ (12.7mm) thick.
Price: $65.99
STRAP-ON CHEEK PAD 2021 M14 1/2″ STRAP ON CHEEKPIECE
Leave a Comment
Comfortable, strap-on cheek pad helps you gain a positive and consistent cheekweld on buttstocks without an integral cheekrest or raised comb. Felt-like, waterproof inner pad with overlaid PVC shell cushions recoil and minimizes perceived vibration, so your face takes less of a beating when firing large caliber rifles or full automatic weapons. Outer covering of heavyweight, 1000 Denier ballistic cloth resists abrasion and perspiration. Three, extra-thick, hook-and-loop straps with loops allow you to cinch it down tight on the stock for absolutely no movement under recoil. Installs and removes in just seconds. Designed originally for the M14/M1A, but fits equally well on sporting rifles a
SPECS: 1000 Denier nylon, black or tan. 1⁄2″ (12.7mm) thick.
Price: $65.69
BASIC FIELD TOOL KIT BROWNELLS BASIC FIELD TOOL KIT, BLACK
Leave a Comment
Versatile, compact tool kit helps prevent minor firearm malfunctions from ending your field outing ahead of schedule. Like our popular gun-specific Field Maintenance Packs, this kit was developed for serious shooters who are on the go, and features only the highest quality, longest lasting gunsmithing tools available. These tools were carefully selected by our gunsmithing technicians for general field repair and maintenance of a host of firearm types, so you’re as prepared as possible to tackle those readily correctable problems that occur when you least expect them. Perfect for the competitive shooter, avid hunter, and mobile armorer who need the basics to help field strip and perf
SPECS: Total kit weight – 4 lb. 13 oz. (2. 2 kg). Includes: Magna-Tip Set – #81 Driver Handle. 1¼” (3.2cm) diameter. 73⁄4” (19.7cm) OAL. Polyethylene Bench Box & Tray – 85⁄8” (21.8cm) long, 4¼” (10.8cm) wide, 17⁄8” (4.7cm) high
Price: $204.99 Versatile, compact tool kit helps prevent minor firearm malfunctions from ending your field outing ahead of schedule. Like our popular gun-specific Field Maintenance Packs, this kit was developed for serious shooters who are on the go, and features only the highest quality, longest lasting gunsmithing tools available. These tools were carefully selected by our gunsmithing technicians for general field repair and maintenance of a host of firearm types, so you’re as prepared as possible to tackle those readily correctable problems that occur when you least expect them. Perfect for the competitive shooter, avid hunter, and mobile armorer who need the basics to help field strip and perf
SPECS: Total kit weight – 4 lb. 13 oz. (2. 2 kg). Includes: Magna-Tip Set – #81 Driver Handle. 1¼” (3.2cm) diameter. 73⁄4” (19.7cm) OAL. Polyethylene Bench Box & Tray – 85⁄8” (21.8cm) long, 4¼” (10.8cm) wide, 17⁄8” (4.7cm) high
Price: $204.99 Precision-machined, solid steel tool lets you stake the carrier key screws the best way—from the sides—to ensure they don’t back out under the most strenuous rapid-fire conditions. Eliminates the hassle of trying to stake the screws with a hammer and punch that could slip and damage the key, screws, or carrier. Holds carrier securely and positions the key so it can be dimpled in the correct locations by tightening the four hex screws on the tool. An additional retaining screw on top of the tool prevents the carrier from moving. The tip of this screw is machined flat to make sure it applies even retaining force and won’t mar the carrier. All screw tips are hardened
SPECS: 1018 carbon steel, black oxide finish. 3” (7.62cm) long, 2” (5.1cm) wide, 2” high. Price: $70.99 Compact, two-in-one specialty tool removes the firing pin spring pin, plus the hammer mainsprings on your P250 pistol. Features an elliptical tip for pushing on the firing pin spring pin without flattening the head, plus a concave tip for the safe, controlled removal of the hammer double mainsprings. Precision machined from steel bar stock, then hardened to Rc 52 for added strength. Small enough to fit in your pocket, range bag, or armorer’s kit. SPECS: Steel, Rc 52 hardness. 3½” (9.5cm) long x 5⁄16″ (8mm) diameter handle. Price: $19.99 This deluxe punch set gives you a versatile selection of 20 punches to easily start, remove and install pins, align holes, plus drift and stake sights without marring the part or firearm finish. We combined alignment punches, flat tip mini punches, starter punches, a nylon drift punch, and a center and prick punch with our most popular pin punches, then added a machined Delrin® bench block to hold and organize them all for easy access. Punches are constructed of hardened steel with parallel-ground shanks and either knurled or hexagonal handles. The nylon drift punch is solid nylon and can be shaped for your specific application. Alignment punches feature a tapered pin with a working l
SPECS: Steel, knurled or hexagonal handle, except nylon drift punch is solid nylon. Nylon Punch – Contains (1), 4” (10cm) long x 5/16” (7.9mm) diameter. Alignment Punches – Contains (1) of each diameter: .070” (1.8mm) to .156” (4.0mm); .110” (2.8mm) to .187&rdquo
Price: $9.99 This Starrett Micrometer offers accurate electronic performance with a full range of features. See readings clearly on the easy to read high contrast LCD readout that displays in conventional inch or millimeter graduations. Other features include an attractive no-glare black wrinkle finish on the frame and no-glare satin chrome finish on thimble and sleeve, a balanced frame design for comfort and ease of use, ring-style knurled lock nut, smooth friction thimble for uniform pressure, one-piece spindle, auto off after 30 minutes of non-use, measurement hold button, and preset button to install any reading at any position.
SPECS: Resolution through 4 inches: .00005 inches (0.001mm), Over 4 inches: .0001 inches (0.001 mm). Price: $204.99 This T-Handle tap wrench is ideal for holding taps, drills, reamers and other small tools to be turned by hand. It features a centered body for use on lathe centers of on upright drilling machines to start the tap straight. Its jaws conform to the tool being held, making it rigid and less apt to loosen when used. It is also heat treated and designed to hold square shanks. The sliding handle is frictionally held and can be removed entirely.
Price: $29.95 The L.S. Starrett Angle Meter features a magnetic base which frees hands when used on ferrous surfaces. It measures any angle for pitch or slope and offers handy rise, run, angle, and pitch information on its back. It also features a large, readable scale for accurate readings from 0-90+ in any quadrant.
Price: $19.95 The L.S. Starrett Digital Micrometer offers an accurate and functional versatility. It features the ability to retain and return to the true zero reading and automatically shuts off after 30 minutes of non-use. It offers a balanced frame design, easy keyboard control, stable 1-piece spindle and measurement hold button. It also features a IP65 level of protection against coolant, water, dirt, and dust. It is manufactured with a micro-lapped carbide measuring face and given a no-glare finish.
SPECS: Range: 1 in [Max], 25 mm [Max], Resolution (Length): 0.000050 in, 0.001000 mm, Accuracy: .0001 in (.002 mm), Anvil Tip Type: Cylindrical, Spindle Diam: 1/4 in, Spindle Tip Type: Cylindrical, Tip Material: Carbide, Display Type: Digital LCD, Thimble Mechanism: Friction, Thimble Finish:
Price: $224.99 The Bushnell 740001C Bushnell Magnetic Boresighter for Riflescopes works on all calibers and firearms. Its revolutionary design eliminates the need for arbors and magnetically attaches to the muzzle to facilitate a quick sighting in.
Price: $117.99 The Bushnell 740001C Bushnell Magnetic Boresighter for Riflescopes works on all calibers and firearms. Its revolutionary design eliminates the need for arbors and magnetically attaches to the muzzle to facilitate a quick sighting in.
Price: $46.99 TOOL FRONT/REAR SIGHT
Price: $12.74 We combined 19 of our most popular roll pin punches and added a handy bench block to come up with the perfect punch set for the busy shop or department armor. Easily start, remove, and install spring pins and roll pins in firearms without damage to the pin or firearm. Features (5) holder punches, (7) starter punches, and (7) standard punches that can easily handle any job out there. Made from solid steel, with parallel-ground shanks and knurled handles. Also includes a non-marring, nylon drift punch that won’t damage or scrape delicate surface finishes. Machined, Delrin® bench block holds and organizes all the punches for easy access. Holder punches cup and hold
SPECS: Punches – Steel, knurled handle, matte black. Nylon Punch – 4” (10cm) long x 5⁄16″ (7.9mm) diameter. Holder Punches – Contains (1) of each diameter: 1⁄16″ (1.6mm), 5⁄64″ (2mm), 3⁄32″ (2.4mm), 1⁄8″ (3.2mm), 9&
Price: $9.99 We combined 19 of our most popular roll pin punches and added a handy bench block to come up with the perfect punch set for the busy shop or department armor. Easily start, remove, and install spring pins and roll pins in firearms without damage to the pin or firearm. Features (5) holder punches, (7) starter punches, and (7) standard punches that can easily handle any job out there. Made from solid steel, with parallel-ground shanks and knurled handles. Also includes a non-marring, nylon drift punch that won’t damage or scrape delicate surface finishes. Machined, Delrin® bench block holds and organizes all the punches for easy access. Holder punches cup and hold
SPECS: Punches – Steel, knurled handle, matte black. Nylon Punch – 4” (10cm) long x 5⁄16″ (7.9mm) diameter. Holder Punches – Contains (1) of each diameter: 1⁄16″ (1.6mm), 5⁄64″ (2mm), 3⁄32″ (2.4mm), 1⁄8″ (3.2mm), 9&
Price: $100.99 Lightweight, flexible pad features a soft, absorbent fabric surface that protects the finish on your guns during cleaning and repair. Zorb-Tech® anti-flow technology allows the top fabric layer to absorb spills while the non-slip PVC backing prevents “soak-through” onto your bench. Easily folds up, so you can keep it in your range bag and have a padded surface available at the shooting bench. Cleans with warm water and mild detergent. Small pad is just the right size for a handgun, large pad works great for rifles, shotguns, and muzzleloaders. SPECS: Polyester fabric, green w/PVC backing. Small - 20” (50.8cm) long x 16” (40.6cm) wide. Large - 54” (137cm) long x 16” wide. Price: $9.99 Lightweight, flexible pad features a soft, absorbent fabric surface that protects the finish on your guns during cleaning and repair. Zorb-Tech® anti-flow technology allows the top fabric layer to absorb spills while the non-slip PVC backing prevents “soak-through” onto your bench. Easily folds up, so you can keep it in your range bag and have a padded surface available at the shooting bench. Cleans with warm water and mild detergent. Small pad is just the right size for a handgun, large pad works great for rifles, shotguns, and muzzleloaders. SPECS: Polyester fabric, green w/PVC backing. Small - 20” (50.8cm) long x 16” (40.6cm) wide. Large - 54” (137cm) long x 16” wide. Price: $5.99 Precision machined, non-marring brass punches drift sights and drive pins without risk of damage to the sight, pin, or firearm. We combined 20 of our most popular non-marring brass punches, added a compact bench block and came up with a great addition for the work bench. Features (4) starter punches, (8) roll pin punches, and (8) standard punches for a variety of different jobs. Delrin® bench block holds and organizes all 20 punches for easy access, plus is resistant to most solvents. Starter punches are used to start the removal of steel or aluminum pins. Short, tapered shaft is extra stiff to prevent bending and twisting. Roll Pin punches feature a
SPECS: Brass. Starter Punches - Contains (1) of each diameter: 1⁄16″ (1.6mm), 3⁄32″ (2.4mm), 1⁄8″ (3.2mm), 5⁄32″ (4mm). Roll Pin Punches – Contains (1) of each diameter: 1⁄16″, 3⁄32″, 1⁄8
Price: $9.99
BASIC FIELD TOOL KIT BROWNELLS BASIC FIELD TOOL KIT, COYOTE
Leave a Comment
AR-15/M16 CARRIER KEY STAKING TOOL AR-15 CARRIER KEY STAKING TOOL
Leave a Comment
SIG SAUER P250 ASSEMBLY & DISASSEMBLY TOOL SIG SAUER P-250 ASSEMB/DISSASSEM TOOL
Leave a Comment
DELUXE PUNCH BENCH SET BROWNELLS DELUXE PUNCH SET BENCH BLOCK
Leave a Comment
3734 1″ DIGITAL MICROMETER WITH CASE 3734 1″ DIGITAL MICROMETER WITH CASE
Leave a Comment
T-HANDLE TAP WRENCH 50427 – 93A T-HANDLE TAP WRENCH
Leave a Comment
ANGLE METER 36080 – ANGLE METER
Leave a Comment
796 SERIES IP67 ELECTRONIC MICROMETER 796 SERIES IP67 ELECTRONIC MICROMETER
Leave a Comment
MAGNETIC BORESIGHTER 743333-PROFESSIONAL BORE SIGHTER W/CAS
Leave a Comment
MAGNETIC BORESIGHTER 740001C-MAGNETIC BORE SIGHTER
Leave a Comment
TOOL FRONT/REAR SIGHT C61721 TOOL, CX4 FRONT/REAR SIGHT
Leave a Comment
ROLL PIN PUNCH SET BROWNELLS ROLL PIN PUNCH BENCH BLOCK
Leave a Comment
ROLL PIN PUNCH SET BROWNELLS ROLL PIN PUNCH BENCH SET
Leave a Comment
GUN CLEANING PAD RIFLE SHOTGUN 16″X54″ CLEANING MAT
Leave a Comment
GUN CLEANING PAD HANDGUN SIZE-16″X20″ CLEANING MAT
Leave a Comment
BRASS PUNCH SET BROWNELLS BRASS PUNCH BENCH BLOCK
Leave a Comment
