REMINGTON 870 PISTOL GRIP SYSTEM REM 870 PISTOL GRIP W/BUFFER TUBE RAIL
Leave a Comment
Pistol grip with integral MIL-STD 1913 Picatinny rail lets you install red dot sights, ghost-rings, and other optics on your tactical shotgun. Heavy duty, 12-slot rail with radiused underside is contoured to fit the full-length of the receiver and holds tight with the included steel buttstock bolt, even during heavy recoil. Open center design allows the use of iron sights, however optics may have to be removed. Ergonomic pistol grip with pebble-textured, hard rubber palm swells and finger grooves reduce shock, enhance trigger control, and improve weapon handling during sustained fire. Interchangeable grip panel system includes three different size palm swells and two different size finger
SPECS: Fits Remington 870, 12 gauge only. Pistol Grip – Molded polymer, hard rubber inserts, matte black. Extension Tube – Aluminum, hardcoat anodized, matte black. 1.17” (2.98cm) O.D. Fits commercial diameter M-4 style buttstock. Buttstock – Molded polymer, matte blac
Price: $129.99 Pistol grip with integral MIL-STD 1913 Picatinny rail lets you install red dot sights, ghost-rings, and other optics on your tactical shotgun. Heavy duty, 12-slot rail with radiused underside is contoured to fit the full-length of the receiver and holds tight with the included steel buttstock bolt, even during heavy recoil. Open center design allows the use of iron sights, however optics may have to be removed. Ergonomic pistol grip with pebble-textured, hard rubber palm swells and finger grooves reduce shock, enhance trigger control, and improve weapon handling during sustained fire. Interchangeable grip panel system includes three different size palm swells and two different size finger
SPECS: Fits Remington 870, 12 gauge only. Pistol Grip – Molded polymer, hard rubber inserts, matte black. Extension Tube – Aluminum, hardcoat anodized, matte black. 1.17” (2.98cm) O.D. Fits commercial diameter M-4 style buttstock. Buttstock – Molded polymer, matte blac
Price: $199.99 Pistol grip with integral MIL-STD 1913 Picatinny rail lets you install red dot sights, ghost-rings, and other optics on your tactical shotgun. Heavy duty, 12-slot rail with radiused underside is contoured to fit the full-length of the receiver and holds tight with the included steel buttstock bolt, even during heavy recoil. Open center design allows the use of iron sights, however optics may have to be removed. Ergonomic pistol grip with pebble-textured, hard rubber palm swells and finger grooves reduce shock, enhance trigger control, and improve weapon handling during sustained fire. Interchangeable grip panel system includes three different size palm swells and two different size finger
SPECS: Fits Remington 870, 12 gauge only. Pistol Grip – Molded polymer, hard rubber inserts, matte black. Extension Tube – Aluminum, hardcoat anodized, matte black. 1.17” (2.98cm) O.D. Fits commercial diameter M-4 style buttstock. Buttstock – Molded polymer, matte blac
Price: $89.99 Drop-in replacement for factory stock lets you adjust the comb height and left/right position to provide a solid cheekweld for different types of shooting or different shooters. Simply loosen two hex-head screws on the right side of the comb to change height; remove the comb and loosen the two support posts to change left/right position. Made from lightweight, yet exceptionally strong, 30% fiberglass-reinforced molded polymer that resists impact, moisture, and surface abrasion. Available with a non-reflecting black finish or silver/black/gray carbon graphite basket weave pattern. Molded-in pebble texturing at the pistol grip helps you maintain a secure hold, while a generous, 1″ thic
SPECS: Fiberglass-reinforced molded polymer, matte black or Carbon Graphite finish, both with black synthetic rubber recoil pad. Mounting hardware and instructions included. Price: $199.95 Drop-in replacement for factory stock lets you adjust the comb height and left/right position to provide a solid cheekweld for different types of shooting or different shooters. Simply loosen two hex-head screws on the right side of the comb to change height; remove the comb and loosen the two support posts to change left/right position. Made from lightweight, yet exceptionally strong, 30% fiberglass-reinforced molded polymer that resists impact, moisture, and surface abrasion. Available with a non-reflecting black finish or silver/black/gray carbon graphite basket weave pattern. Molded-in pebble texturing at the pistol grip helps you maintain a secure hold, while a generous, 1″ thic
SPECS: Fiberglass-reinforced molded polymer, matte black or Carbon Graphite finish, both with black synthetic rubber recoil pad. Mounting hardware and instructions included. Price: $179.95 Drop-in replacement for factory stock lets you adjust the comb height and left/right position to provide a solid cheekweld for different types of shooting or different shooters. Simply loosen two hex-head screws on the right side of the comb to change height; remove the comb and loosen the two support posts to change left/right position. Made from lightweight, yet exceptionally strong, 30% fiberglass-reinforced molded polymer that resists impact, moisture, and surface abrasion. Available with a non-reflecting black finish or silver/black/gray carbon graphite basket weave pattern. Molded-in pebble texturing at the pistol grip helps you maintain a secure hold, while a generous, 1″ thic
SPECS: Fiberglass-reinforced molded polymer, matte black or Carbon Graphite finish, both with black synthetic rubber recoil pad. Mounting hardware and instructions included. Price: $179.95 Drop-in replacement for factory stock lets you adjust the comb height and left/right position to provide a solid cheekweld for different types of shooting or different shooters. Simply loosen two hex-head screws on the right side of the comb to change height; remove the comb and loosen the two support posts to change left/right position. Made from lightweight, yet exceptionally strong, 30% fiberglass-reinforced molded polymer that resists impact, moisture, and surface abrasion. Available with a non-reflecting black finish or silver/black/gray carbon graphite basket weave pattern. Molded-in pebble texturing at the pistol grip helps you maintain a secure hold, while a generous, 1″ thic
SPECS: Fiberglass-reinforced molded polymer, matte black or Carbon Graphite finish, both with black synthetic rubber recoil pad. Mounting hardware and instructions included. Price: $199.95 Drop-in replacement for factory stock lets you adjust the comb height and left/right position to provide a solid cheekweld for different types of shooting or different shooters. Simply loosen two hex-head screws on the right side of the comb to change height; remove the comb and loosen the two support posts to change left/right position. Made from lightweight, yet exceptionally strong, 30% fiberglass-reinforced molded polymer that resists impact, moisture, and surface abrasion. Available with a non-reflecting black finish or silver/black/gray carbon graphite basket weave pattern. Molded-in pebble texturing at the pistol grip helps you maintain a secure hold, while a generous, 1″ thic
SPECS: Fiberglass-reinforced molded polymer, matte black or Carbon Graphite finish, both with black synthetic rubber recoil pad. Mounting hardware and instructions included. Price: $219.95 Drop-in replacement for factory stock lets you adjust the comb height and left/right position to provide a solid cheekweld for different types of shooting or different shooters. Simply loosen two hex-head screws on the right side of the comb to change height; remove the comb and loosen the two support posts to change left/right position. Made from lightweight, yet exceptionally strong, 30% fiberglass-reinforced molded polymer that resists impact, moisture, and surface abrasion. Available with a non-reflecting black finish or silver/black/gray carbon graphite basket weave pattern. Molded-in pebble texturing at the pistol grip helps you maintain a secure hold, while a generous, 1″ thic
SPECS: Fiberglass-reinforced molded polymer, matte black or Carbon Graphite finish, both with black synthetic rubber recoil pad. Mounting hardware and instructions included. Price: $219.95 Drop-in replacement for factory stock lets you adjust the comb height and left/right position to provide a solid cheekweld for different types of shooting or different shooters. Simply loosen two hex-head screws on the right side of the comb to change height; remove the comb and loosen the two support posts to change left/right position. Made from lightweight, yet exceptionally strong, 30% fiberglass-reinforced molded polymer that resists impact, moisture, and surface abrasion. Available with a non-reflecting black finish or silver/black/gray carbon graphite basket weave pattern. Molded-in pebble texturing at the pistol grip helps you maintain a secure hold, while a generous, 1″ thic
SPECS: Fiberglass-reinforced molded polymer, matte black or Carbon Graphite finish, both with black synthetic rubber recoil pad. Mounting hardware and instructions included. Price: $199.95 Drop-in replacement for factory stock lets you adjust the comb height and left/right position to provide a solid cheekweld for different types of shooting or different shooters. Simply loosen two hex-head screws on the right side of the comb to change height; remove the comb and loosen the two support posts to change left/right position. Made from lightweight, yet exceptionally strong, 30% fiberglass-reinforced molded polymer that resists impact, moisture, and surface abrasion. Available with a non-reflecting black finish or silver/black/gray carbon graphite basket weave pattern. Molded-in pebble texturing at the pistol grip helps you maintain a secure hold, while a generous, 1″ thic
SPECS: Fiberglass-reinforced molded polymer, matte black or Carbon Graphite finish, both with black synthetic rubber recoil pad. Mounting hardware and instructions included. Price: $179.95 Drop-in replacement for factory stock lets you adjust the comb height and left/right position to provide a solid cheekweld for different types of shooting or different shooters. Simply loosen two hex-head screws on the right side of the comb to change height; remove the comb and loosen the two support posts to change left/right position. Made from lightweight, yet exceptionally strong, 30% fiberglass-reinforced molded polymer that resists impact, moisture, and surface abrasion. Available with a non-reflecting black finish or silver/black/gray carbon graphite basket weave pattern. Molded-in pebble texturing at the pistol grip helps you maintain a secure hold, while a generous, 1″ thic
SPECS: Fiberglass-reinforced molded polymer, matte black or Carbon Graphite finish, both with black synthetic rubber recoil pad. Mounting hardware and instructions included. Price: $219.95 MAGAZINE EXTENSION KIT, 3-ROUND, BLUE
Price: $82.65 Dual-color fiber optic sight with vivid, contrasting colors provides optimal contrast and visibility in all light conditions. Fits over ventilated ribs and is held firmly in place with a high-strength screw that replaces the original front bead. Interchangeable, low profile mounting adapters fit snugly over a wide range of rib widths to eliminate lateral movement. Requires removal of original front bead. Fits ventilated rib widths: .24″, .25″, .29″, .313″, .315″, and .39″. Includes five steel mounting screws that match the most common front bead thread sizes. SPECS: Base – Aluminum, anodized finish, matte black. 11⁄16” (2.7cm) long x 5⁄16” (7.6mm) wide. Center Rod – Polymer, ¾” (1.9cm) long x .06” (1.5mm) dia. Outer Ring Rod – Polymer, ¾” (5.1cm) long x .12” (3mm) dia. Fits
Price: $36.99 Dual-color fiber optic front sight with vivid, contrasting colors combines with a fiber optic rear sight that’s fully adjustable to provide optimum contrast and improved accuracy. Front sight fits over ventilated rib and is held firmly in place with a high-strength screw that replaces the original front bead. Rear sight includes a steel bottom plate that fits under the rib and clamps together with two Allen head screws for a tight hold, even under the heaviest recoil. Completely adjustable for windage and elevation. Includes interchangeable, low profile mounting adapters that fit snugly over a wide range of rib widths to eliminate lateral movement. Precision machined aluminum, then
SPECS: Bases – Aluminum, anodized finish, matte black. Steel hardware. Front Screws – Includes (1) of each size: 3-56 tpi, 3mm x 0.05, 3mm x 0.06, 5-40 tpi, and 6-48 tpi. Front Sight: Base – 11⁄16” (2.7cm) long x 5⁄16” (7.6mm) wide. Center Rod – Red polymer, ¾&r
Price: $63.99 Dual-color fiber optic front sight with vivid, contrasting colors combines with a fiber optic rear sight that’s fully adjustable to provide optimum contrast and improved accuracy. Front sight fits over ventilated rib and is held firmly in place with a high-strength screw that replaces the original front bead. Rear sight includes a steel bottom plate that fits under the rib and clamps together with two Allen head screws for a tight hold, even under the heaviest recoil. Completely adjustable for windage and elevation. Includes interchangeable, low profile mounting adapters that fit snugly over a wide range of rib widths to eliminate lateral movement. Precision machined aluminum, then
SPECS: Bases – Aluminum, anodized finish, matte black. Steel hardware. Front Screws – Includes (1) of each size: 3-56 tpi, 3mm x 0.05, 3mm x 0.06, 5-40 tpi, and 6-48 tpi. Front Sight: Base – 11⁄16” (2.7cm) long x 5⁄16” (7.6mm) wide. Center Rod – Red polymer, ¾&r
Price: $63.99 Dual-color fiber optic sight with vivid, contrasting colors provides optimal contrast and visibility in all light conditions. Fits over ventilated ribs and is held firmly in place with a high-strength screw that replaces the original front bead. Interchangeable, low profile mounting adapters fit snugly over a wide range of rib widths to eliminate lateral movement. Requires removal of original front bead. Fits ventilated rib widths: .24″, .25″, .29″, .313″, .315″, and .39″. Includes five steel mounting screws that match the most common front bead thread sizes. SPECS: Base – Aluminum, anodized finish, matte black. 11⁄16” (2.7cm) long x 5⁄16” (7.6mm) wide. Center Rod – Polymer, ¾” (1.9cm) long x .06” (1.5mm) dia. Outer Ring Rod – Polymer, ¾” (5.1cm) long x .12” (3mm) dia. Fits
Price: $36.99 Dual-color fiber optic sight with vivid, contrasting colors provides optimal contrast and visibility in all light conditions. Fits over ventilated ribs and is held firmly in place with a high-strength screw that replaces the original front bead. Interchangeable, low profile mounting adapters fit snugly over a wide range of rib widths to eliminate lateral movement. Requires removal of original front bead. Fits ventilated rib widths: .24″, .25″, .29″, .313″, .315″, and .39″. Includes five steel mounting screws that match the most common front bead thread sizes. SPECS: Base – Aluminum, anodized finish, matte black. 11⁄16” (2.7cm) long x 5⁄16” (7.6mm) wide. Center Rod – Polymer, ¾” (1.9cm) long x .06” (1.5mm) dia. Outer Ring Rod – Polymer, ¾” (5.1cm) long x .12” (3mm) dia. Fits
Price: $36.99 Dual-color fiber optic sight with vivid, contrasting colors provides optimal contrast and visibility in all light conditions. Fits over ventilated ribs and is held firmly in place with a high-strength screw that replaces the original front bead. Interchangeable, low profile mounting adapters fit snugly over a wide range of rib widths to eliminate lateral movement. Requires removal of original front bead. Fits ventilated rib widths: .24″, .25″, .29″, .313″, .315″, and .39″. Includes five steel mounting screws that match the most common front bead thread sizes. SPECS: Base – Aluminum, anodized finish, matte black. 11⁄16” (2.7cm) long x 5⁄16” (7.6mm) wide. Center Rod – Polymer, ¾” (1.9cm) long x .06” (1.5mm) dia. Outer Ring Rod – Polymer, ¾” (5.1cm) long x .12” (3mm) dia. Fits
Price: $36.99 LUG, LOCKING 4.86, F
Price: $118.21
REMINGTON 870 PISTOL GRIP SYSTEM REM 870 PISTOL GRIP WITH TUBE & STOCK
Leave a Comment
REMINGTON 870 PISTOL GRIP SYSTEM REM 870 PISTOL GRIP WITH PIC RAIL SYS
Leave a Comment
REM 870/1100/11-87 ADJUSTABLE COMB STOCKS 11-87 ADJUSTABLE STOCK SET BLACK
Leave a Comment
REM 870/1100/11-87 ADJUSTABLE COMB STOCKS 870 ADJUSTABLE STOCK ONLY BLACK
Leave a Comment
REM 870/1100/11-87 ADJUSTABLE COMB STOCKS 11-87 ADJUSTABLE STOCK ONLY BLACK
Leave a Comment
REM 870/1100/11-87 ADJUSTABLE COMB STOCKS 870 ADJUSTABLE STOCK SET BLACK
Leave a Comment
REM 870/1100/11-87 ADJUSTABLE COMB STOCKS 11-87 ADJUSTABLE STK SET-CARBON GRAPHI
Leave a Comment
REM 870/1100/11-87 ADJUSTABLE COMB STOCKS 1100 ADJUSTABLE STK SET CARBON GRAPHIT
Leave a Comment
REM 870/1100/11-87 ADJUSTABLE COMB STOCKS 1100 ADJUSTABLE STOCK SET BLACK
Leave a Comment
REM 870/1100/11-87 ADJUSTABLE COMB STOCKS 1100 ADJUSTABLE STOCK ONLY BLACK
Leave a Comment
REM 870/1100/11-87 ADJUSTABLE COMB STOCKS 870 ADJUSTABLE STOCK SET CARBON GRAPHI
Leave a Comment
MAGAZINE EXTENSION KIT, 3-ROUND, BLUE F32365 12 GA 870 MAG EXT KIT 3RD, BLUE
Leave a Comment
DEAD CENTER BEAD SIGHT UNIVERSAL FO BEAD SIGHT/RD INSIDE YLLW
Leave a Comment
DEAD CENTER ADJUSTABLE SHOTGUN SIGHT SET DEAD CTR ADJ SYST/RD RR,RD IN YLLW FR
Leave a Comment
DEAD CENTER ADJUSTABLE SHOTGUN SIGHT SET DEAD CTR ADJ SYST/RED RR,RED IN GRN FR
Leave a Comment
DEAD CENTER BEAD SIGHT UNIVERSAL FO BEAD SIGHT/RED INSIDE GRN
Leave a Comment
DEAD CENTER BEAD SIGHT UNIVERSAL FO BEAD SIGHT/GRN INSIDE RED
Leave a Comment
DEAD CENTER BEAD SIGHT UNIVERSAL FO BEAD SIGHT/YLLW INSIDE RD
Leave a Comment
LUG, LOCKING 4.86, F C5C514 LUG. LOCKING UGB 4.86 (F)
Leave a Comment
